Call Us Today
You are here: Home » News » Industry News » Antifreeze For Laser Cutting Machine

Contact Us

 : +8615960413802

 : +86-595-85950802

Antifreeze For Laser Cutting Machine

Views: 1     Author: Site Editor     Publish Time: 2019-11-01      Origin: Site

The temperature in winter is often very low, if the laser cutting machine is not taken to keep warm, it will affect its normal use. In fact, we generally add antifreeze to keep the machine warm. The editor will introduce its antifreeze knowledge for everyone.

1. Name: Ethylene glycol. It can be purchased at the local hardware and chemical store. It is also available online, but the liquid cannot be transported.

2. The ratio with deionized water is about 30%, which means 70% water and 30% ethylene glycol.

3. 0 degrees or less including 0 degrees must be added.

4. Ethylene glycol is not equal to ethanol (alcohol), please be sure to distinguish strictly.

5. The full name of the purchase is: antifreeze glycol.

6. Any antifreeze can not completely replace deionized water, and can not be used for a long time throughout the year. After winter, the pipeline must be cleaned with deionized water or purified water, and deionized water or purified water must be used as the coolant.

The antifreeze of the laser cutting machine has a simple understanding through the above introduction, but the editor here reminds users to pay attention to the ratio of it to water and the temperature when adding antifreeze.


​Copyright 2007 TopSteel Machinery Co., Ltd.